Water Decoloring Agent (BWD) color removal for wastewater CAS NO.55295-98-2

1.Biggest manufacturer in China with more than 10 years experience 2.Not only can remove the color,but also can decrease the COD with absolutely performance. 3.Only produce few sludge and easy for dewatering. Do not return to color.

Our BWD-01 Water Decoloring Agent is used fcolremoval of dyeing wastewater effluent with colproblem.

Features:
1) Quaternary cationic polymer
2) Application:
A) Decoloring, flocculating, COD decreasing
B) Mainly used fcolremoval fdense colwaste water from Dyestuffs plants, suitable to treat waste water with activated, acidic disperse dyestuffs
C) Can also be used to treat waste water from textile industry dye Houses, pigment industry, printing ink industry paper industry
3) Appearance: Light-color, sticky liquid
4) Viscosity: 50 - 250mPa. S (20o C)
5) Solid content: >50%
6) pH 30% solution: 3 - 5
7) Specific gravity: 1.2 - 1.3 (25o C)
8) Harmless, no-flammable non-explosive
9) Usage:
A) Dilutes with 10 - 40 times water then dosed into the waste water Directly, after being mixed fseveral minutes, waste is precipitatedAir-floated the water become clear
B) pH index of the waste water should be adjusted to 7 - 10 fbetter Result
C) If colority COD are relatively high, it can be used with the help ofPolyaluminum chloride to reduce treatment cost, whether polyaluminum Chloride is used before afterwards depends on the flocculation test the treatment process
10) Storage: Can be stored at room temperature, can not be placed in the Sun, within a temperature range of 10 - 30o C

Packing:
25kg/plastic drum, 50kg/plastic drum, 250kg/plastic drum 1, 250kg/plastic drum